|
Heating and ventilation systems
| 1 — air giving to a windscreen and lateral glasses
2 — air giving to the top part of a body
(Castors allow to open and close smoothly air giving, and рычажки provide change of a direction of a stream of air arriving in salon)
3 — air giving to feet in a forward part of salon
(Similar pressure-blowing apertures are available and in a back part of salon)
4 — a regulator of temperature for a salon left-hand side
5 — a regulator of distribution of air:
• to glasses
• the top part of a body
• to feet
(Any intermediate positions) are possible |
6 — a regulator of giving of air
(Heating and ventilation work at the included fan)
7 — a regulator of temperature for right
The salon parties
8 — a key of inclusion of heating
Back glass
9 — an inclusion key
рециркуляционного a mode |
|
Temperature
The driver and the passenger on a forward seat can choose desirable temperature for the party of salon. Scale divisions serve as a reference point at a temperature choice in salon. It is expedient to establish temperature 22С. After a start of motion the chosen temperature is established very quickly and supported at constant level. |
|
Air distribution
You can direct air arriving in salon to glasses, to the top part of a body and to feet. Installation in all intermediate positions is possible. If air is directed to feet, air small amount arrives as well to glasses to prevent them запотевание. As standard installation position of "6 hours” (see an illustration) is recommended. |
|
Air giving
Smooth adjustment of giving of air is provided. Heating and ventilation the more effectively, than more strongly air giving. In position 0 fan and heating are switched off. In position 0 giving of air can be completely stopped as a result of key pressing рециркуляционного a mode. |
|
Heating of back glass
At the included heating of back glass the control lamp burns. Heating of back glass is disconnected automatically. |
|
Retsirkuljatsionnyj mode
In the presence of unpleasant smells in external air it is possible to stop its receipt in salon. In that case the system will use only air being in salon.
|
If your car has a multipurpose steering wheel with the button рециркуляционного a mode you can operate this mode as well from a steering wheel (address to Section Controls and devices).
If at included рециркуляционном a mode will occur запотевание glasses, switch off рециркуляционный a mode.
|
Ventilation without draughts
|
You can adjust air receipt to the top part of a body according to your desires.
Corrugated castors 1 you can smoothly open and close дефлекторы. Рычажки 2 allow you to change directions of air arriving in salon. The corrugated castor 3 will allow you to add in air arriving to the top part of a body, more or less cold air.
Turn to dark blue marks - is more cool
Turn to red marks - is warmer
|
Adjustment дефлекторов in a back part of salon is carried out similarly to how it is described above. Arriving air is not warmed up.
The microfilter
The microfilter detains parts of a dust and the flower pollen, present in air taken away outside. At maintenance service its replacement is made. Necessity of preschedule replacement of the filter can be defined on considerable decrease in the maximum giving of air.
Fast airing in the summer
|
1. Temperature regulators choose pleasant temperature for you in salon, for example 22С.
2. A regulator of distribution of air establish in position.
3. A regulator of the fan for air giving translate in extreme right position.
4. Open pressure-blowing apertures for air giving to the top part of a body.
5. A corrugated castor 3 establish on dark blue marks cool), address above. |
Fast warming up of salon in the winter
|
1. Temperature regulators choose pleasant temperature for you in salon, for example 22С.
2. A regulator of distribution of air establish in position.
3. A regulator of the fan for air giving translate in the position corresponding to the maximum giving of air.
4. Close pressure-blowing apertures in a back part of salon. |
Having warmed in the winter
If glasses have frozen or have misted over, the following installation is recommended:
|
1. Temperature regulators choose pleasant temperature for you, for example 22С.
2. A regulator of distribution of air establish in position.
3. A regulator of the fan for air giving translate in the position corresponding to an average level of giving of air.
4. Close pressure-blowing apertures in a back part of salon. |
Defrosting and drying of glasses
1. Temperature regulators choose pleasant temperature for you in salon, for example 22С.
2. A regulator of distribution of air establish in position.
3. A regulator of the fan for air giving translate in extreme right position.
4. Close pressure-blowing apertures in a back part of salon.
5. For defrosting of back glass include its heating.
|