BMW 5 series E39

Since 1996-2001 of release

Repair and car operation



BMW E39
+ Introduction
- The maintenance instruction
   Controls, devices and control lamps
   Zapornye devices and the anticreeping alarm system
   The salon equipment
   Safety systems
   Fuel refuelling, start and engine stop
   Lay brake
   Manual box of a gear change (РКПП)
   Automatic transmission (АТ) *
   Темпостат
   The alarm system of emergency rapprochement at a parking (PDC) *
   System of automatic stabilisation of stability with a regulator of traction effort (ASC+T)
   Electronic adjustment of rigidity of amortisation (EDC) * and adjustment of a road gleam
   Illumination
   Heating and ventilation system
   Automatic кондиционер*
   Independent systems of heating and ventilation
   System самодиагностики*
   The travelling computer
   Обкатка
   The Katalitichesky converter
   Antiblocking system of brakes (ABS)
   Movement with the trailer
   Luggage carrier on a roof
   Automobile телефон*
   Radio reception
   Readjustment of headlights
   Cowl
   Automobile radio receiver
   Audiosystem of type Hi-Fi with DSP*
   Sign emergency остановки*
   Аптечка*
+ Current leaving and service
+ The engine
+ Systems of cooling, heating
+ The power supply system and release
+ Engine electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Electric equipment schemes
+ System of onboard diagnostics


Independent systems of heating and ventilation

Independent system отопления*

If on your car there is an independent system of heating also presence of independent system of ventilation thus is meant. However such variant when the independent system of ventilation is established only is possible also.

Management of both systems is carried out from the multiinformation display or from the onboard monitor.

It is possible to program in advance inclusion time to have possibility to sit down in the car with already heated-up salon. Besides, snow and ice removal is facilitated.

The independent system of heating is automatically disconnected after 30 minutes of work. Probably also its direct inclusion or deenergizing. In view of considerable power consumption it is not necessary to include system twice successively, without giving possibility accumulator to be recharged on the move in the period between inclusions.

If time of inclusion of system of independent heating is in advance programmed, it is resulted in working readiness at temperature of external air more low 16С, and at direct inclusion - irrespective of temperature.

Nagretyj air automatically moves to wind and to lateral glasses and to feet. The heater works at full capacity.

If the ignition key is in position 1 you can regulate air temperature in salon, its giving, and also a mode of distribution of air.

The system works still some time after its deenergizing (at already gone out control lamp).

In a warm season system it is necessary approximately once a month to include and disconnect approximately in 5 minutes.

At all do not use system in the closed premises. At refuelling of the car the system needs to be switched off.

Independent system вентиляции*

The fan of system of heating / the automatic conditioner is used for ventilation and fall of temperature of air in salon.

It is possible to program time of inclusion of system. Ventilation works within 30 minutes. Probably also direct inclusion and deenergizing. In view of considerable power consumption it is not necessary to include independent ventilation twice successively, without giving possibility accumulator to be recharged on the move in the period between inclusions.

If time of inclusion of independent ventilation is in advance programmed, the system is resulted in working readiness at temperature of external air above 16С, and at direct inclusion - irrespective of temperature. Thus the car should not be in movement.

Air moves through adjustable pressure-blowing apertures in the top part of the forward panel, directing it to the top part of a body. Therefore that independent ventilation could work, these apertures should be opened.

When the ignition key is in position 1, you can regulate the expense of air and a mode of its distribution is similar to how it becomes at using independent system of heating.

Remote control by independent system of heating

1 — an inclusion key
2 — the aerial
3 — a control lamp
4 — a deenergizing key
5 — batteries
6 — a cover of a compartment for batteries

Remote control allows to switch on and off independent system of heating. Average range of action makes about 350 metres.

Remote control work can be broken in some districts as a result of work of other systems or the devices using the same frequency.

Дистанционно management allows to operate independent system of heating if it yet does not work as a result of the direct or programmed inclusion.

 INCLUSION

1. Completely extend the aerial.
2. Press a key 1. The control lamp 3 will blink three times and then will burn during all time of inclusion (a maximum of 30 minutes).
3. Completely clean the aerial, but not during a triple blinking of a control lamp.


 DEENERGIZING

1. Completely extend the aerial.
2. Press a key 4. The control lamp will blink three times and will go out.
3. Completely clean the aerial.

Batteries

Replace batteries if at inclusion of system of independent heating the control lamp does not blink.

 PERFORMANCE ORDER

1. Uncover 6 compartments for batteries.
2. Establish two batteries of the same type (LR 1). The type and correct position of batteries are boldly designated at the bottom of a compartment.
3. Latch a cover.

Transmitter initialization

If you use the new transmitter, for example, as replacement faulty or wish to use the additional transmitter it is necessary to make their initialization. Use no more than two transmitters is supposed.

If any period of time specified more low is not maintained, initialization will appear unsuccessful and process should be repeated.

 PERFORMANCE ORDER

1. Take from fastening a safety lock of independent system of heating (in a luggage carrier on the right, address to materials of the Head the Onboard electric equipment) and in 10 seconds again establish it into place.
2. At once after installation of a safety lock within 3 seconds press the button 4.
3. Then within 5 seconds press the button 1.
4. In 3 seconds the system is ready to work.