BMW 5 series E39

Since 1996-2001 of release

Repair and car operation

+ Introduction
+ The maintenance instruction
+ Current leaving and service
+ The engine
+ Systems of cooling, heating
+ The power supply system and release
+ Engine electric equipment
+ Manual transmission
+ Automatic transmission
- Coupling and power shafts
   + Coupling
   + Power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Electric equipment schemes
+ System of onboard diagnostics

Coupling and power shafts


Separate characteristics are resulted also in the text of the Head and in case of compulsion of their performance are allocated by a bold type


The characteristic



The one-disk dry
With диафрагменной a spring

The minimum thickness of an overlay of a disk of coupling

7.5 mm

Power shafts

The characteristic


Quantity of greasing the SHRUS


The internal hinge


      •  models 520 i, 525tds


      •  models 523 i, 528i, 530i, 540i


The external hinge


      •  models 520 i, 525tds


      •  models 523 i, 528i, 530i, 540i


Efforts of a tightening of carving connections

The moments of an inhaling of fixture are resulted in the text of the Head and on some иллюстрациях*.
*Выделенные in the text a bold type the inhaling moments are subject to exact observance; the efforts not allocated with a bold type are resulted only roughly

The characteristic


Reducer of a back axis to a beam in front

180 Nanometers

Reducer of a back axis to a beam behind

105 Nanometers

Fastening bolts карданного and приводного shaft to a reducer of the back bridge


      • the  Bolt with internal polyhedron М10

85 Nanometers

      •  Bolt М10 with a gear fillet (bolts and washers are replaced)

95 Nanometers

      •  Bolt М12

110 Nanometers

      •  Bolt Torx М10

85 Nanometers

              ••  with gear basis М8

65 Nanometers

              ••  with gear basis М10

100 Nanometers

              ••  with gear basis М12

160 Nanometers

Nut of a nave with a fillet

300 Nanometers