BMW 5 series E39

Since 1996-2001 of release

Repair and car operation



BMW E39
+ Introduction
+ The maintenance instruction
+ Current leaving and service
+ The engine
+ Systems of cooling, heating
+ The power supply system and release
- Engine electric equipment
   + Ignition system
   + System of preheat of the diesel engine
   - Charge and start systems
      Removal and installation of the storage battery
      The maloobsluzhivaemaja storage battery
      Check of the storage battery
      The self-category of the storage battery
      Gymnastics of the storage battery
      The generator - the general data
      Security measures at work with the generator
      Check of pressure of gymnastics of the generator
      Removal and generator installation
      Check and replacement of brushes of the generator and pressure regulator
      Starter
      Removal and starter installation
      Removal, check and installation of the electromagnetic traction relay
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Electric equipment schemes
+ System of onboard diagnostics



Removal and generator installation

REMOVAL

1. Disconnect a cable of weight from the storage battery. The battery is in a luggage carrier behind the right lateral facing.

At a battery detachment records in electronic memory are erased. Address to Section Removal and installation of the storage battery.

2. Заизолируйте a tape the plug of the cable going to a negative pole of the storage battery to exclude casual contact to battery poles.

3. Remove the air filter, address to Section Removal and installation of the case of the air filter and a measuring instrument of weight of air.

4. Remove муфту the fan, address to Section Removal and installation of the fan and муфты the fan.

5. Remove клиновой a belt, address to Section Removal, installation and a tension клинового a belt.

6. Disconnect a ventilating hose behind the generator.

7. Disconnect from an underside of the generator plug D tip + for what press a stopper.

8. Uncover joinings In +. Turn away a nut and remove a thick cover.

9. Turn away bolts of fastening and take out the generator.


INSTALLATION

1. Establish the generator, tighten fastening bolts.
2. From an underside the moment of 15 Nanometers fix a cable.
3. Join штекерное connection and fix it.
4. Put on behind the generator a ventilating hose.
5. Put on клиновой a belt, address to Section Removal, installation and a tension клинового a belt. 6. Establish муфту the fan, address to Section Removal and installation of the fan and муфты the fan.
7. Establish the air filter, address to Section Removal and installation of the case of the air filter and a measuring instrument of weight of air.