BMW 5 series E39

Since 1996-2001 of release

Repair and car operation



BMW E39
+ Introduction
+ The maintenance instruction
+ Current leaving and service
+ The engine
+ Systems of cooling, heating
+ The power supply system and release
+ Engine electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
- Brake system
   Antiblocking system
   Removal and installation of lobbies brake колодок
   Removal and installation of a brake disk / of a support of a forward brake
   Removal and installation back brake колодок
   Removal and installation of back brake supports
   Removal and installation of a brake disk of back wheels
   Measurement of a thickness of a brake disk
   Brake liquid
   Removal of air from brake system
   Replacement of brake pipelines
   Replacement of a forward brake hose
   Check of the vacuum amplifier of a brake
   Removal and installation brake колодок a lay brake
   Adjustment of a lay brake
   Removal and installation of the lever of a lay brake
   Removal and installation of a cable of a lay brake
   Check and replacement of the switch of a stoplight
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Electric equipment schemes
+ System of onboard diagnostics



Removal and installation of a cable of a lay brake

 REMOVAL

1. Remove brake колодки.

2. Remove the lock колодок. For this purpose take out a finger (1).
3. Disconnect a cable support, having turned on for this purpose bolts (2).

4. Disconnect a cable and extend it from a protective tube.


 INSTALLATION

1. Lay a cable to the lever of a brake and a back wheel.

Inserting a cable into a protective tube watch that the tube adjoined to a support.

2. Hook on a cable for a plastic clip.

3. Insert a support into a cable and fix at a brake board two bolts (2).

4. Establish all details of a brake, illustrations in Section Removal and installation brake колодок a lay brake see.
5. Establish the brake lever.
6. Adjust a brake.