BMW 5 series E39

Since 1996-2001 of release

Repair and car operation

BMW E39
+ Introduction
+ The maintenance instruction
+ Current leaving and service
- The engine
   - Procedures of repair of the engine
      Compression check
      Removal and installation of the bottom guard of an impellent compartment
      Removal and engine installation
      Removal and installation of the inlet pipeline
      Removal and installation of a head of cylinders
      Removal and camshaft installation
      Removal and installation of valves
      Check of directing valves
      Processing of saddles of valves in a head of cylinders / grinding in of valves
      Removal, installation and tension клинового a belt
   + System of greasing of the engine
+ Systems of cooling, heating
+ The power supply system and release
+ Engine electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Electric equipment schemes
+ System of onboard diagnostics

Removal and installation of the bottom guard of an impellent compartment

REMOVAL

1. Lift and establish the car on supports.
2. Turn clips (arrows on an accompanying illustration) fastenings of a back part of the bottom guard (under the pallet картера) a screw-driver on 1/4 turns and remove a guard.
3. Turn away bolts of fastening of a forward part of a guard (behind a bumper) (arrows on an accompanying illustration) to a bumper and remove.

INSTALLATION

1. Put at first a forward part of the bottom guard, then back and fix bolts.
2. Lower the car on wheels.