BMW 5 series E39

1. Before the work beginning allow to the car to pass some kilometres to warm up a lubricant liquid of differential, then поддомкратьте the car and reliably establish it on support.
2 Place drain capacity, rags, newspapers and a face key under the car. As the lubricant liquid will be hot, put on rubber gloves to prevent burns.
3 Remove a stopper of a bulk mouth from differential; it is top of two stoppers.

2. Turn out a stopper of a jellied mouth (1) face key. Address to an accompanying illustration.
5. If the oil small amount, level normal pours out and РКПП is tight. Otherwise check up a finger, whether level of oil reaches the bottom edge.

At considerable leaks of oil it is necessary to establish the reason and to eliminate it.

Having established capacity under differential, ослабьте a drain stopper (2); it is bottom of two stoppers.

3. Cautiously turn on a drain stopper, yet will not remove it from a casing.
7 Allow to all liquid to flow down in drain capacity. The drain stopper is magnetised and draws to itself a metal shaving. Wipe a shaving from a stopper. Wrap a stopper with a new sealing ring the moment of 50 Nanometers.
8 становите a drain stopper and reliably tighten it.
9 Fill differential with a lubricant liquid.

Oil РКПП dense enough. Therefore do not fill in at once a lot of oil. Make a break and substitute capacity for gathering of the poured oil.

10 Establish a bulk stopper with a new sealing ring and reliably tighten its moment of 50 Nanometers.
11 Lower the car on the earth. Having passed the first some kilometres, check up, whether the drain stopper proceeds.