Replacement трансмиссионного oils of a manual box of a gear change
The tools necessary for given work, include support for car maintenance in the lifted condition, a face key for отдавания a drain stopper, drain capacity, newspapers and pure rags. It is necessary to prepare also necessary quantity трансмиссионного oils (address to Section “Types and volumes of applied greasings and liquids” Specifications).
Replacement of oil РКПП is made each 80 000 km within the limits of maintenance service carrying out. In intervals it is necessary to check РКПП on tightness and to supervise oil level in it. Level should reach the bottom edge of a jellied mouth.
Transmissionnoe oil merges in a hot condition (i.e. right after trips on the car); from hot oil pollution is easier leave. Works are better for making in rubber gloves.
|
1. Поддомкратьте the car and reliably establish it on support. Try to establish the car as it is possible more exactly. Remove the bottom guard of an impellent compartment, address to Section Removal and installation of the bottom guard of an impellent compartment.
2. Place the necessary equipment under the car, trying not to concern hot components of final system. |
3. Turn out a stopper of a jellied mouth (1) on РКПП. Address to an accompanying illustration.
4. Substitute capacity and turn out a drain stopper (2) under РКПП. |
|
5. Allow to oil to flow out completely. Carefully clear a drain stopper, then establish it and reliably tighten.
| At all do not pour out oil together with a household waste. |
|
6. Screw a drain stopper and tighten its moment of 50 Nanometers.
7. Fill transmission by new oil, then establish a cover of a bulk mouth and reliably tighten it.
8. Lower the car on the earth. Establish the bottom guard of an impellent compartment Having passed the first some kilometres, check up, whether the drain stopper proceeds.
| Watch to pouring some oil above level of the bottom edge of a jellied mouth. |
9. Tighten a stopper of a jellied mouth the moment resulted in Specifications. |
|
|